As a trusted Manufacturer and Supplier of Automatic Buffing Machine
, we present sturdily (from angle and channel section) built Automatic Buffing Machine. The machine is suitable for buffing of surgical blades. Our Automatic Buffing Machine is equipped with single buffing head with two loading and unloading arrangements. The surgical blades to the ground are fed into two magazines. Single blade is taken out from the stack of each magazine and is transferred to the fixture plates mounted on to the slide by transferring arrangement. The slide retracts and buffing starts one after other on both the blades. When the slide reaches to its end position, the blades (already buffed) are automatically transferred to the unloading section. While returning, the slide reaches to its original position and the blades are again fed on to the fixture plates by transferring arrangements. All this process is done in continuation. The automatic buffing of 50 to 60 blades per minute is a very unique feature of this product.
- Fully Automatic
- Surgical blades manufacturing industries
- Industrial blades manufacturing industries
- Total power requirement for the machine is 1 KW.
- The machine’s air requirement is about 20 lpm at 5 kg cm.
- Buffing of all size of surgical blades is possible with our machine, just by changing some parts/attachments.
- A very neat looking panel consisting genuine electronic part is fitted.
- All the pneumatic parts used are of STNC make or equal ant.
- Floor area of the machine is approx. 2 ft. x 3 ft.
- Weight of the machine is approx. 300 kilo grams.
- The loading and unloading of blades is automatic.
- Dressing of buffing wheel and applying of paste to the buffing wheel is also done automatically.