We are one of the renowned Manufacturers and Suppliers of Automatic Surgical Blade Grinding Machine, which is very robust in construction and suitable for the grinding 10 to 15 surgical blades per minute.The surgical blades to the ground are fed into a magazine. Single blade is taken out from the stack and arm is fitted with picking arrangement which transfers the blade on the first turntable. Then the slide retracts and grinding starts with curve side first. On return as slide reaches its original position, the blade is again picked up by the second arm and transfers the same to the second slide (Turntable) with upside down movement. On the same time, a new blade is fed on to first slide and grinding is done on both the blades together. After that the third arm picks the blade from second turntable and transfers it to unloading magazine. All this process is done at the same time. Our Automatic Surgical Blade Grinding Machine enables the automatic grinding of all possible blades, automatic dressing of wheel and automatic lubrication.
Used I : Surgical blade manufacturing industries
Total power requirement for this machine is 4 KW.
The machine requires floor area of 1.25m x 2m.
A 100 liters water tank is provided to the machine along with a magnetic separator.
The machine air requirement is about 40 lpm at 5 kg cm.
A 100 liters hydraulic tank is provided with the machine.
Grinding of all size of surgical blades is possible with our machine just by changing some of the parts/attachments. Only one particular size is supplied with the machine
The machine is supplied with auto feed arrangement for dressing the grinding wheel. The outer portion of the wheel is properly controlled (in microns). This helps in reducing the grinding wheel consumption.
A very neat looking panel consisting of microprocessor with PLC is fitted.
All the pneumatic parts used are of the best quality.